| When we are given counsel and guidance many of us have heard the words "safety first" or "prevention is better than cure". These wise instructions are intended to keep us away from harm. People who hold authority and those who have more experience than us have advocated the refuge from ruin concept. Correct decisions allow us to learn lessons and common sense from the things that happen to us in life. Regulations, procedures and laws must be followed because they are not mere suggestions but could become life-savers in certain instances.  When working with conveyors and conveyor systems following rules is not an option. Like in a lot of things in life, government authorities have imposed regulations on the proper handling and operation of conveyors. Time, money and effort are always invested in any given project. Therefore, special attention should be given to ensure safe working conditions for the workers around conveyor systems. The Occupational Safety and Health Administration's guidelines and standards regarding the safe operation of conveyor systems need to be reviewed and discussed. Doing so would help us avoid costly mishaps in times to come. The OSHA governmental body has developed a certain set of guidelines specifically targeted at conveyors. When we understand what some of these conveyor requirements are it is then we may be better equipped to deal with the many questions and specifications we will face when buying, building or designing a new network. The OSHA has directed that all conveyors should make a blaring warning sound when started. Conveyors should also make a loud sound when stopped. The OSHA also requires that conveyor machines can be stopped from a main control point or from a remotely manned operator's console at any moment.  Emergency locks should also be present in all conveyor systems. These locks need to be re-activated when an unforeseen stop occurs or after inspections and repairs are done. Safety rails that pass standards must be installed at all times so with the observance of correct object distances. Clear and legible signs must be present near all moving working conveyors as well as broken ones. These signs should reveal any notable hazards and problems. These guidelines are life savers when implemented properly. They will help conveyor operators stay away from major accidents and harm. The government has issued these guidelines for safe operation of conveyor systems. Although these may seem obvious, a review and reiteration of correct conveyor procedures will never go to waste. It is important to never treat them like toys. Sometimes electronic gadgets and powerful mechanics can excite and tempt even the most gentle and responsible of humans. A key is to always respect conveyors for the dangerous and powerful machines that they are. Another solid piece of conveyor advice is to always use the tracks and conveyor arrangements for what they were designed for. There are so many conveyor experts available and companies who specialize in custom conveyor solutions that there is no need to try and use conveyor cross functional if that was not there intended design. Trying out new things is part of human nature but when it comes to conveyor manipulation and adaptation it is best left to professionals and in tested and practiced settings. Finally with conveyor operations it is never wise to take shortcuts. Skimping on materials or lackadaisical care is nothing to partake in when managing a conveyor. They are moving machines that require extreme accountability and observation. Until conveyors or humans are perfect it is best we take every step we can to provide safe conveyor conditions regardless of application. Accidents are an inherent part of life and the more measure we take to prevent them the better off we will all be. Conveyors are serious and dangerous pieces of equipment when not handled right. When handled with care conveyors are a blessing and an absolute necessity in the work place. For more information on Discount Conveyor Parts or Conveyor Components in general, please visit Blue Water Manufacturing. This entry was posted on Tuesday, January 10th, 2012 at 4:21 pm by Paul Timmerman and is filed under Technology. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.  | |||
| | |||
| | |||
|
0 comments:
Post a Comment