Proceco Stainless Steel Dual Conveyor (3) Stage Pass Through ...

Model # BCW 44/55 x 10-6W-3R-12D-G-SS304
Serial No. 029-00

General Description:

This washer is fabricated out of 304 Stainless Steel. There are two (2) individual conveyors that have separate conveyor drives. The conveyor speeds are 2 to 12 FPM. The left conveyor is 44″W & the right conveyor is 55″W. The stainless 1″ x 1″ flat wire belts are rated for 25 # S/F. The load capacity is rated at 6700 pounds for both conveyors.

There is a 24″L load end and a 24″L unload end. The heated wash is 6′ long, a 4′ long transition, 3′ long heated rinse section, and a 12′ long heated dry off section. Both wash and rinse sections are heated with a Maxon burner which fires into an immersion tube. The gas fired dry off section is rated for 500-F and is heated by a Maxon "Ovenpak" burner. This washer has two 20 HP vertical gusher pumps in the wash section and one 20 HP vertical gusher pump in the rinse section. A "Triple Bag" filter system is mounted on the side.

Controls: An Allen Bradley SLC 504 programmable logic controller controls all functions of this washer. There are two (2) Omron digital temperature controllers that control temperature for the wash and rinse cycles. A Honeywell UDC 3000 digital temperature controller controls temperature of the dry off oven.

Stages: 180 Deg. F. WASH, RINSE, and 500 Deg. DRY-off Oven

Work Area: (1) @ 44" W x 8" H x 72" (1) @ 55" W x 8" H x 72"

Voltage: 460 3 Phase

Heat: Gas 3.7 MBTU

Condition is excellent as removed from Service.